+8615051961708

What are the typical lead and tin percentages in Leaded Tin Bronze?

Sep 29, 2025

Jenny Liu
Jenny Liu
As an environmental consultant for Changzhou Pufa Machinery Co., Ltd, I focus on sustainable manufacturing practices. My work includes optimizing production processes to minimize environmental impact while maintaining product quality.

Leaded tin bronze is a versatile and widely used alloy known for its excellent combination of mechanical properties, corrosion resistance, and machinability. As a leading supplier of leaded tin bronze, I am often asked about the typical lead and tin percentages in this alloy. In this blog post, I will delve into the composition of leaded tin bronze, exploring the role of lead and tin and discussing the typical percentages found in various grades.

The Role of Lead and Tin in Leaded Tin Bronze

Before we discuss the specific percentages, it's important to understand the role that lead and tin play in the properties of leaded tin bronze.

Tin: Tin is a key alloying element in bronze, which is essentially an alloy of copper and tin. Adding tin to copper increases the alloy's strength, hardness, and corrosion resistance. Tin also improves the fluidity of the molten alloy during casting, making it easier to form complex shapes. As the tin content increases, the strength and hardness of the bronze also increase, but at the expense of ductility.

Lead: Lead is added to tin bronze to improve its machinability. Lead acts as a lubricant during machining, reducing tool wear and improving the surface finish of the machined parts. It also helps to break up chips, making them easier to remove from the cutting area. However, lead has a relatively low melting point and is not soluble in copper or tin, so it forms discrete particles in the alloy matrix. These particles can reduce the alloy's strength and ductility if the lead content is too high.

Typical Lead and Tin Percentages in Leaded Tin Bronze

The lead and tin percentages in leaded tin bronze can vary depending on the specific grade and application. Here are some common grades of leaded tin bronze and their typical compositions:

SAE 660 Bronze

SAE 660 Bronze is one of the most widely used grades of leaded tin bronze. It is known for its excellent machinability, corrosion resistance, and wear resistance. The typical composition of SAE 660 bronze is approximately 88% copper, 10% tin, and 2% lead. This combination of elements provides a good balance of strength, hardness, and machinability, making it suitable for a wide range of applications, including bearings, bushings, gears, and valve components.

Alloy Tin Bronze

Alloy Tin Bronze refers to a group of bronzes that contain various alloying elements in addition to copper and tin. The lead and tin percentages in alloy tin bronze can vary widely depending on the specific alloy. For example, some alloy tin bronzes may contain up to 20% tin and 5% lead, while others may have lower percentages of these elements. These alloys are often designed to provide specific properties, such as high strength, high hardness, or improved corrosion resistance, for specialized applications.

Copper Nickel Tin Bronze

Copper Nickel Tin Bronze is another type of leaded tin bronze that contains nickel as an additional alloying element. Nickel improves the alloy's strength, hardness, and corrosion resistance, especially in marine environments. The typical composition of copper nickel tin bronze may include 70 - 90% copper, 5 - 15% tin, 2 - 10% nickel, and 1 - 5% lead. This alloy is commonly used in applications where high strength, corrosion resistance, and good machinability are required, such as marine hardware, electrical connectors, and aerospace components.

Factors Affecting the Lead and Tin Percentages

The choice of lead and tin percentages in leaded tin bronze depends on several factors, including the desired properties of the alloy, the manufacturing process, and the application requirements.

SAE 660 BronzeAlloy Tin Bronze

Desired Properties: If high strength and hardness are required, a higher tin content may be chosen. However, if machinability is the primary concern, a higher lead content may be more appropriate. In some cases, a balance between these properties must be achieved by carefully selecting the lead and tin percentages.

Manufacturing Process: The manufacturing process can also influence the lead and tin percentages. For example, in casting processes, the fluidity of the molten alloy is an important consideration. A higher tin content can improve fluidity, but too much tin can also increase the risk of porosity in the castings. In machining operations, a higher lead content can improve tool life and surface finish, but excessive lead can cause problems with chip evacuation and may reduce the alloy's mechanical properties.

Application Requirements: The specific application requirements play a crucial role in determining the lead and tin percentages. For example, in applications where the alloy will be exposed to corrosive environments, a higher tin content may be necessary to improve corrosion resistance. In applications where the alloy will be subjected to high loads or wear, a higher tin content and a proper heat treatment may be required to increase the alloy's strength and hardness.

Quality Control and Certification

As a supplier of leaded tin bronze, we understand the importance of quality control and certification. We ensure that our products meet the highest standards of quality and consistency by using advanced manufacturing processes and strict quality control measures. Our leaded tin bronze products are tested and certified to meet the relevant industry standards, such as ASTM, SAE, and ISO.

We also provide detailed material certificates with each shipment, which include information about the chemical composition, mechanical properties, and heat treatment of the alloy. This allows our customers to have full confidence in the quality and performance of our products.

Conclusion

In conclusion, the typical lead and tin percentages in leaded tin bronze can vary depending on the specific grade and application. SAE 660 bronze, alloy tin bronze, and copper nickel tin bronze are some common grades with different lead and tin compositions. The choice of lead and tin percentages is influenced by factors such as the desired properties of the alloy, the manufacturing process, and the application requirements.

As a reliable supplier of leaded tin bronze, we are committed to providing high-quality products that meet the diverse needs of our customers. Whether you need a standard grade of leaded tin bronze or a custom alloy with specific lead and tin percentages, we can work with you to find the best solution for your application.

If you are interested in purchasing leaded tin bronze or have any questions about our products, please feel free to contact us. We look forward to discussing your requirements and providing you with the best possible service.

References

  • Metals Handbook, Volume 2: Properties and Selection: Nonferrous Alloys and Pure Metals, ASM International
  • Copper and Copper Alloys, CDA Publication
  • Engineering Materials and Their Applications, William D. Callister, Jr. and David G. Rethwisch

Send Inquiry