+8615051961708

Features of Tin Bronze Plate

May 02, 2021

Bronze is hard, easy to melt, can be cast well, and is stable in the air, so even in the Iron Age after the Bronze Age, it did not lose its use value. In addition to tin bronze plates containing 3% to 14% tin, phosphorus, zinc, lead and other elements are often added. It is an alloy that has been used early by mankind, and it has been used for about 4,000 years. It is corrosion-resistant, wear-resistant, has good mechanical properties and process performance, and can be welded and brazed well without sparks during impact.

It is divided into processed tin bronze and cast tin bronze. The tin content of tin bronze for pressure processing is less than 6% to 7%, and the tin content of cast tin bronze is 10% to 14%. Commonly used grades are QSn4-3, QSn4.4-2.5, QSn7-O.2, ZQSn10, ZQSn5-2-5, ZQSN6-6-3, etc. Tin bronze is a non-ferrous metal alloy with a small casting shrinkage rate. It can be used to produce castings with complex shapes, clear outlines and low air tightness requirements.

Tin bronze plates are very resistant to corrosion in the atmosphere, sea water, fresh water and steam, and are widely used in steam boilers and marine ship parts. Phosphorus-containing tin bronze has good mechanical properties and can be used as wear-resistant parts and elastic parts of high-precision machine tools. Lead-containing tin bronze is often used as wear-resistant parts and sliding bearings, and zinc-containing tin bronze can be used as high-airtight castings.

The solidification range of tin bronze plate is large, dendrite segregation is serious; concentrated shrinkage is not easy to form during solidification, and the volume shrinkage is small; tin reverse segregation is easy to appear in the ingot, and white spots can be seen on the surface of the ingot when it is severe, and even tin-rich Particles, generally called tin sweat, improved casting methods and process conditions can reduce the degree of reverse segregation; in liquid alloys, tin is prone to form hard and brittle inclusions SnO2, and smelting must be fully deoxidized to prevent the reduction of alloy mechanical properties caused by inclusions .

It has little sensitivity to overheating and gas, and can be welded and brazed well; there is no spark when impacted, it is non-magnetic, cold-resistant, and has extremely high wear resistance. Tin bronze plate is an important copper alloy used in industry. In order to improve its casting, mechanical and wear resistance properties, and save tin, alloy elements such as phosphorus, zinc, lead, etc. are added to tin bronze. Therefore, tin bronze can be divided into three types: tin-phosphorus bronze, tin-zinc bronze and tin-zinc-lead.

www.cn-czpufa.com

Send Inquiry