1, To improve the control of production and processing production process. Use a soft brush and cold water to remove the slag on the surface of the aluminum bronze plate. Before the aluminum bronze plate is hot rolled, it must be wrapped with a paper lining to prevent the surface from being scratched. In addition, what are the common problems when welding deoiled copper pipes? We should use all-oil hot rolling, upgrade the continuous extrusion press degreasing equipment, slow down the hot rolling speed, and use all feasible methods to remove the surface residual air pollution sources. In addition, production and processing managers should improve the company's production management and enhance inspection efforts.
2. Secondly, it is necessary to improve the maintenance of the inert gas in the whole process of the heat treatment method. Since the chemical properties of copper are very optimistic, the copper strip-aluminum bronze plate-copper rod-copper tube-dipping air-conditioning copper tube-Shandong Chenxingshengtong Metal Composite Materials Co., Ltd. can be more optimistic than the air in the high-temperature heat treatment method. gaseous compounds that cause rapid chemical reactions. Then, it is necessary to maintain the inert gas in it more powerfully to prevent the aluminum bronze plate from being oxidized. Under essential conditions, it is also one of the feasible methods to appropriately increase the inert gas.
3. Again, of course, to improve surface clearance and maintain a high degree of gloss. In the production process of rough rolling and heat treatment, the surface of aluminum bronze plate will inevitably lead to hydroxide, so the necessary removal methods such as phosphating treatment, acid removal, stainless steel passivation, etc. must be well implemented.
4. Improve the packaging that controls the output of the product. The red copper strip should be dried as much as possible after phosphating treatment. The humid geographical environment will accelerate the corrosion of copper and affect the accuracy of product output. Therefore, in order to better ensure the drying of the product, it is necessary to take double precautions. In addition to drying the output of the product as much as possible, we must also work on packaging. Under the condition of packaging, you can put waterproof paper in the outer packaging box, and then use the packaging bag to bind it, which can effectively prevent the influence of heavy moisture in the body during transportation.
www.cn-czpufa.com