So what is the hardness of the aluminum bronze sleeve? In fact, there are standards for reference. The following is a detailed introduction for everyone.
The aluminum bronze sleeve has excellent physical properties and excellent plastic deformation under hot conditions. It has excellent physical properties, excellent plastic deformation in hot state, good plastic deformation in hot state, good drillability, easy brazing and electric welding, corrosion resistance, but easy to cause corrosion cracking, in addition The price is low, and it is a common copper type that is widely used.
The hardness of the aluminum bronze sleeve used for milling is generally HB140 up and down, and the organic chemical composition is: copper Cu: 59.0~63.0; zinc Zn: capacity; lead Pb: 1.8~3.7; boron P: ≤0.01; iron Fe+zinc Sn: 1.2 ; Beryllium Sb: ≤0.005; Bismuth Bi: ≤0.002; Note: ≤0.5 (residue).
The hardness of aluminum bronze sleeve is generally HB140 or lower. According to Jin Bing’s production and manufacturing experience, the hardness of C86300 manganese brass must generally exceed 180HB and the tensile strength is relatively good. It is generally used for Rongchang self-lubricating bearings are made. This type of rolling bearing can produce a self-lubricating method when working under the standard of no oil stains, and can also work under the standard of no oil stains, so it is called self-lubricating bearings.
Standard for tempering treatment: heat treatment temperature of 650~850℃; annealing temperature of 600~700℃; ultra-low temperature annealing temperature of 270~300℃ for removing thermal stress.
The above is the "hardness of aluminum bronze sleeve" shared for everyone, I hope it can be helpful to you. The hardness of this material is pretty good, and when combined with other materials, it can be applied to many scenarios.
www.cn-czpufa.com
