How are aluminum bronze rods made?
1. Raw materials: Import waste copper materials from my country or abroad (such as water storage tanks, stop valves, and drinking water leaders) or use bare copper and zinc in conjunction with each other (the cost of this method is higher).
2. Heat treatment furnace, including 1 forging heating furnace and 1 constant temperature furnace, the temperature is 1000 degrees, the scrap copper material can be melted in the heat treatment furnace immediately,
3. The water cooler, the template, and the copper rod are used. If you haven't seen the object with your own eyes, then the description is probably very difficult for you to understand.
4. Optical cable cable pay-off machine (including fiber laser cutting), automatic type, each copper rod is about 4 meters long after being dragged out, the optical fiber laser cutting on the optical cable cable pay-off machine encounters automatic cutting
5. The outer surface of the brushed stainless steel copper rod is black and gray when it is dragged out, and the diameter of the round copper rod is different. For example, others want a 28mm round copper rod. The copper rod is generally as large as 28.5-28.8 when it is dragged out. Try to get rid of the outer skin as much as possible, that is, brushed stainless steel, made into a 28mm diameter.
6. Straightening, some manufacturers have requirements for the straight bending of copper rods, which are very small copper rods. At this time, the copper rods need to be straightened.
www.cn-czpufa.com