In actual operation, attention must be paid to the process, such as the melting process; the charge must be deoiled and rusted, kept clean, and a self-made covering agent must be added to the bottom of the electric furnace. Of course, charcoal works too. The added amount should cover the surface of the copper liquid. Turn on the machine and preheat for 10-15 minutes, then add about 90%~95% of high-grade electrolytic copper (be sure to reserve a small amount of electrolytic copper, it is recommended to increase the temperature of the copper liquid by 5% after use) to melt). When the temperature of the copper liquid rises to a high temperature of 1150~1200℃, use 2/3 of the phosphorous copper (the total amount added accounts for 0.14%~0.16% of the total weight of the copper liquid) for alloy pre-deoxidation. At this time, stir the copper liquid with an iron rod coated with graphite paint, or stir with a graphite rod, and then add the preheated (about 200 ℃) pure zinc plate, pure lead plate, and pure tin ingot in turn. up to 1250. At about ℃, the remaining 1/3 phosphorous copper alloy is added for final deoxidation refining. At this time, the alloy liquid is completely returned to the slag (about 200 ℃) after 3 to 5 minutes in a static state.
Processing technology of Tin Bronze Bushing
Sep 03, 2022
Send Inquiry
