+8615051961708

Solid solution processing and production of aluminum bronze pipe

Nov 12, 2021

The solid solution temperature is based on a clear composition. Generally speaking, the solid solution temperature should be relatively increased for models with many types of aluminum alloy elements and high composition. Especially for stainless steel plates with high manganese, molybdenum, nickel, and silicon components, the actual effect of softening can only be achieved by increasing the solid solution temperature and making it fully melted. However, anti-aging steel, such as 321 stainless steel pipe, when the solid solution temperature is high, the cementite of the smoothing element is sufficiently melted in the martensite, and it will precipitate in the dislocation in the shape of Cr23C6 during the subsequent cooling, resulting in stress corrosion. In order to make the cementite of the smoothing elements (TiC and NbC) insoluble and insoluble, the low-limit solid solution temperature is generally selected.

For aluminum bronze pipes, the three factors that are solved by solid solution are temperature, heat preservation time and cooling rate. What is the role of aluminum bronze tube solid solution solution?

1. Make the structure and composition of the aluminum bronze tube uniform. This is especially critical for the raw materials. Because the cold rolling temperature and cooling rate of each section of the hot-rolled tube are different, the organizational structure is inconsistent. Under high temperature, the molecular theme activity is aggravated, the σ phase melts, and the composition tends to be symmetrical. After rapid cooling, a symmetrical single-phase electrical mechanism is obtained.

2. Remove cold work hardening to facilitate cold drawing again. According to the solution solution, the distorted lattice constant is repaired, the stretched and crushed crystals recrystallize, the thermal stress is removed, the compressive strength of the stainless steel plate is reduced, and the elongation rate is increased.

3. Repair the original corrosion resistance of the aluminum bronze pipe. Because of the precipitation of cementite due to cold drawing, the defect of the lattice constant reduces the corrosion resistance of the aluminum bronze tube. After solution solution, the corrosion resistance of aluminum bronze pipe is restored to the best condition.

www.cn-czpufa.com

Send Inquiry