+8615051961708

What is the white substance that appears on the surface of the tin bronze plate after infiltration

Jun 30, 2022

Impregnation, also known as impregnation, impregnation, penetration, is a microporous (slit) infiltration sealing process. The sealing medium (usually a low-viscosity liquid) is infiltrated into the micropores (slits) by means of natural penetration (that is, micropore self-priming), vacuuming and pressurization, and the gaps are filled, and then through natural (room temperature), cooling Or heating and other methods to solidify the sealing medium in the gap to achieve the effect of sealing the gap. There are many materials that can act as infiltrators, such as water, wax, certain vegetable oils, salt solutions (water glass), metals, resins. The main ones that can be widely used in contemporary industrial production are water glass, metal and resin. Water glass appeared earlier as an infiltrating agent and was mostly used for gap sealing of castings. It is characterized by low price, containing a large amount of water, and curing by volatile water, so the shrinkage is large and the pass rate is low. In addition, the parts treated by it are not clean, the production efficiency is low, and the infiltration site is dirty. It is increasingly being replaced by resin. As an infiltrant, tin bronze plate mainly refers to low melting point metal, which is widely used in powder metallurgy industry. The early appearance of resin as an infiltrating agent was some synthetic resins, which were toxic. Later, non-toxic resins appeared and were more and more widely used in castings and powder metallurgy parts. It is characterized by low viscosity (thin), strong penetration ability, high pass rate and high production efficiency. The parts handled by it are easy to clean, and the impregnation site is clean. Phosphorus in tin-phosphorus bronze is a good deoxidizer for copper alloys, which can increase the fluidity of the alloy, improve the technological and mechanical properties of tin-phosphor bronze, but increase the degree of reverse segregation. The limit solubility of phosphorus in tin bronze is 0.15%. If it is too much, a+δ+Cu3P ternary eutectic will be formed. The melting point is 628℃. It is easy to produce hot brittleness during hot rolling, so it can only be cold worked. Therefore, the phosphorus content in deformed tin bronze should not be greater than 0.5%, and during hot working, phosphorus should be less than 0.25%. Bronze with tin as the main alloying element. The tin content is generally between 3 and 14%, and it is mainly used to make elastic components and wear-resistant parts. The tin content of deformed tin bronze does not exceed 8%, and sometimes elements such as phosphorus, lead, and zinc are added. Phosphorus is a good deoxidizer and also improves fluidity and wear resistance. Adding lead to tin bronze can improve machinability and wear resistance, and adding zinc can improve casting properties. This alloy has high mechanical properties, anti-wear properties and corrosion resistance, easy cutting, good brazing and welding properties, small shrinkage coefficient, and non-magnetic. Bronze bushings, bushings, diamagnetic elements and other coatings can be prepared by wire flame spraying and arc spraying. Size specifications are Ф1.6mm, Ф2.3mm. With high strength, corrosion resistance and excellent casting properties, it has been widely used in various industrial sectors for a long time.

www.cn-czpufa.com

Send Inquiry