The Industrial Bronze Bushings we usually use are not only two alloys of tin and copper, but also phosphorus, zinc, lead-nickel and other elements. These alloys generally have corrosion resistance, wear resistance, and good mechanical properties. Factors for process performance stability.
The characteristics of the tin bronze sleeve, this material has a wide range of solidification, easy to disperse shrinkage cavities, low volume shrinkage, poor compactness and other problems. The solution is also easy to react with oxygen to form inclusions, which are sandwiched in the copper sleeve and reduce the mechanical properties of the material itself, so deoxidation must be done well. It has low sensitivity to overheating and gases, is easy to weld and braze, does not spark on impact, is non-magnetic, is cold resistant, and has very good wear resistance.
Tin bronze copper sets are most susceptible to the influence of metal elements, such as phosphorus, zinc, lead, nickel, manganese, iron, titanium, beryllium, zirconium, niobium, boron, aluminum, magnesium, and silicon, which are still mentioned in our previous articles. The content of metal elements must be well controlled, as the content will have a direct impact on the product.
