Tin bronze has good anti-friction properties,Tin Bronze diamagnetism and low temperature toughness. According to the production method, tin bronze can be divided into two categories: pressure-processed tin bronze and cast tin bronze. Pressure-processed tin bronze: The tin content is generally less than 8%,Tin Bronze and it should be supplied by cold and hot pressure processing into plates, strips, rods,Tin Bronze tubes and other profiles.
After work hardening,Tin Bronze its tensile strength and hardness increase, while plasticity decreases. After re-annealing, the plasticity can be improved while maintaining the higher tensile strength,Tin Bronze especially the high elastic limit can be obtained.
Corrosion-resistant and wear-resistant parts, elastic parts,Tin Bronze anti-magnetic parts, sliding bearings, shaft sleeves, etc. in the machine are required for suitable systems.
Commonly used ones are Qsn4-3 Qsn6.5~0.1. Casting tin bronze: It is supplied as ingots and used as castings in the foundry. It is suitable for castings with complex shapes but low density requirements,Tin Bronze such as sliding bearings, gears,Tin Bronze etc. The commonly used ones are ZQsn10-1 ZQsn6-6-3.