+8615051961708

What are the factors affecting the quality of SAE 660 Bronze?

Jun 09, 2025

Grace Li
Grace Li
As a technical support engineer at Changzhou Pufa Machinery Co., Ltd, I provide assistance to our customers in troubleshooting and resolving issues related to our copper alloy products. My expertise spans both material science and mechanical engineering.

SAE 660 bronze, also known as C93200, is a widely used bearing bronze alloy with excellent mechanical properties, corrosion resistance, and wear resistance. As a supplier of SAE 660 bronze, I have witnessed the importance of its quality in various industrial applications. In this blog, I will discuss the factors that affect the quality of SAE 660 bronze and how they can be managed to ensure the production of high - quality products.

Chemical Composition

The chemical composition of SAE 660 bronze is a critical factor in determining its quality. The standard composition of SAE 660 bronze typically consists of approximately 81 - 85% copper (Cu), 6 - 8% tin (Sn), 6 - 8% lead (Pb), and 2 - 4% zinc (Zn). Each element plays a specific role in the alloy's performance.

Copper is the base metal of the alloy and provides the basic strength and ductility. A proper copper content is essential for maintaining the overall integrity of the bronze. If the copper content is too low, the alloy may lack the necessary strength and corrosion resistance. On the other hand, an excessive copper content may increase the cost without providing significant additional benefits.

Tin is added to improve the hardness and wear resistance of the bronze. It forms hard intermetallic compounds with copper, which enhance the alloy's ability to withstand friction and wear. However, too much tin can make the alloy brittle, reducing its ductility and toughness.

Lead is incorporated into SAE 660 bronze to improve its machinability. It acts as a lubricant during machining, reducing tool wear and improving the surface finish of the machined parts. But an improper lead content can affect the alloy's mechanical properties. For example, an excessive lead content may lead to segregation, which can weaken the alloy and cause performance issues.

Zinc is added to improve the fluidity of the molten alloy during casting and to enhance its corrosion resistance. It also helps in reducing the cost of the alloy. However, similar to other elements, an imbalance in zinc content can have negative impacts on the alloy's quality.

To ensure the correct chemical composition, we use advanced analytical techniques such as spectroscopy to accurately measure the element content in the raw materials and during the production process. We also source high - quality raw materials from reliable suppliers to maintain the consistency of the chemical composition.

Manufacturing Process

The manufacturing process of SAE 660 bronze has a significant impact on its quality. There are several methods for producing SAE 660 bronze products, including casting and forging.

Casting

Casting is a common method for producing SAE 660 bronze components. There are different casting techniques, such as sand casting, investment casting, and continuous casting.

In sand casting, the molten bronze is poured into a sand mold. The quality of the sand mold, including its density, porosity, and surface finish, can affect the quality of the cast part. If the sand mold has defects or improper properties, it can lead to casting defects such as porosity, shrinkage, and cracks in the final product.

Continuous casting is a more advanced method that can produce high - quality bronze bars with a uniform structure. Continuous Cast Bronze Bar produced by this method has better mechanical properties and a more consistent chemical composition compared to some other casting methods. During continuous casting, factors such as the pouring temperature, cooling rate, and the speed of the casting process need to be carefully controlled. An improper pouring temperature can cause issues like misruns or cold shuts, while an inconsistent cooling rate can lead to internal stresses and non - uniform grain structures in the cast bar.

Forging

Forging is another important manufacturing process for SAE 660 bronze. It involves applying compressive forces to the bronze to shape it into the desired form. Forging can improve the mechanical properties of the bronze by refining the grain structure and eliminating internal defects. However, forging requires precise control of the forging temperature, pressure, and deformation rate. If the forging temperature is too low, the bronze may crack during the forging process. If the pressure is too high or the deformation rate is too fast, it can also lead to defects in the forged part.

Heat Treatment

Heat treatment is often used to improve the mechanical properties of SAE 660 bronze. Different heat treatment processes, such as annealing, quenching, and tempering, can be applied depending on the specific requirements of the application.

Annealing is a process of heating the bronze to a specific temperature and then slowly cooling it. This process can relieve internal stresses, improve the ductility of the bronze, and refine the grain structure. However, the annealing temperature and time need to be carefully controlled. If the annealing temperature is too high or the time is too long, it may cause grain growth, which can reduce the strength of the bronze.

Quenching is a rapid cooling process that can increase the hardness of the bronze. But it can also introduce high internal stresses, which may lead to cracking. Therefore, quenching is often followed by tempering, which is a process of reheating the quenched bronze to a lower temperature and then cooling it slowly. Tempering can reduce the internal stresses and improve the toughness of the bronze while maintaining a certain level of hardness.

Impurities and Inclusions

Impurities and inclusions in SAE 660 bronze can have a detrimental effect on its quality. These can come from the raw materials or the manufacturing process. Common impurities include sulfur, phosphorus, and iron.

Sulfur can react with copper to form copper sulfide, which can reduce the ductility and corrosion resistance of the bronze. Phosphorus can make the bronze brittle and affect its mechanical properties. Iron can form hard particles in the bronze, which can increase wear during machining and reduce the performance of the alloy in service.

Inclusions, such as oxides and slag, can also cause problems. They can act as stress raisers, leading to crack initiation and propagation under load. To minimize impurities and inclusions, we use high - quality raw materials and implement strict quality control measures during the production process. We also use refining techniques to remove impurities from the molten bronze.

Storage and Handling

Proper storage and handling of SAE 660 bronze products are also important for maintaining their quality. During storage, the bronze should be protected from moisture, chemicals, and physical damage. Moisture can cause corrosion on the surface of the bronze, especially in the presence of certain contaminants. Chemicals can react with the bronze and change its surface properties.

When handling the bronze products, care should be taken to avoid scratches and dents. Scratches can expose the underlying metal to the environment, increasing the risk of corrosion. Dents can introduce local stress concentrations, which may affect the performance of the bronze in service.

Application - Specific Requirements

Different applications have different requirements for the quality of SAE 660 bronze. For example, in bearing applications, the bronze needs to have excellent wear resistance and low friction coefficient. To meet these requirements, the surface finish of the bearing bronze should be carefully controlled. A smooth surface can reduce friction and wear, while a rough surface can increase the contact stress and accelerate wear.

Continuous Cast Bronze BarBearing Bronze Hollow Bar

In applications where corrosion resistance is critical, such as in marine environments, the chemical composition and surface treatment of the SAE 660 bronze need to be optimized. A higher tin content may be beneficial for improving the corrosion resistance, and surface coatings or treatments can be applied to further enhance the protection of the bronze against corrosion.

Bearing Bronze Hollow Bar is often used in applications where a combination of strength, wear resistance, and the ability to carry fluids is required. The quality of the hollow bar, including its internal and external surface finish, wall thickness uniformity, and mechanical properties, is crucial for its performance in these applications.

Tin Bronze Plate is used in various industries, such as electrical and decorative applications. For electrical applications, the conductivity of the tin bronze plate is an important factor, which is related to its chemical composition and manufacturing process. For decorative applications, the surface finish and color of the plate need to meet the aesthetic requirements.

Conclusion

The quality of SAE 660 bronze is affected by multiple factors, including chemical composition, manufacturing process, heat treatment, impurities and inclusions, storage and handling, and application - specific requirements. As a supplier of SAE 660 bronze, we are committed to ensuring the highest quality of our products. We use advanced technologies and strict quality control measures at every stage of the production process to manage these factors and produce SAE 660 bronze products that meet or exceed our customers' expectations.

If you are interested in purchasing high - quality SAE 660 bronze products for your specific application, please feel free to contact us for more information and to discuss your procurement needs. We are ready to provide you with the best solutions and support.

References

  1. Metals Handbook Committee. (2004). Metals Handbook: Properties and Selection: Nonferrous Alloys and Pure Metals. ASM International.
  2. Callister, W. D., & Rethwisch, D. G. (2014). Materials Science and Engineering: An Introduction. Wiley.
  3. Davis, J. R. (Ed.). (2001). Copper and Copper Alloys. ASM International.

Send Inquiry